Holding Magnets

33 products

Showing 1 - 24 of 33 products

Holding magnets are designed for secure, temporary mounting and clamping applications. Our customers rely on them during prototyping for fixtures, test setups, and designs requiring removable magnetic fastening. We carry a wide selection of cap magnets, pin magnets, and hook magnets in stock — available in neodymium and a few caps are ceramic,— giving you solutions for light-duty to heavy-duty holding applications right off the shelf.

Showing 1 - 24 of 33 products

SuperMagnetMan Cap Magnet. Also known as Pot Magnet. Excellent as holding magnets. Provides a strong holding magnet in a smaller area. These holding magnets can provide greater holding and pull force. www.supermagnetman.com

CAP_C10

$0.50

In stock, 8 units

4.8 lb Hold Force: 0.394" (10mm) diameter x 0.197" (5mm) cap thickness x 0.472" (12mm) overall height with an M3 outside screw shaft cap magnet / pot magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Disc Magnet, Grade N35, Nickel plated. Minimum Order Quantity (MOQ) = 10 for this part.

CAP_C16

$0.80

In stock, 40 units

12.0 lb Hold Force: 0.630" (16mm) diameter x 0.197" (5mm) cap thickness x 0.512" (13mm) overall height with an M4 outside screw shaft cap magnet / pot magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Disc Magnet, Grade N35, Nickel plated. Minimum Order Quantity (MOQ) = 10 for this part.

CAP_C25

$1.75

In stock, 6 units

48.2 lb Hold Force: 0.984" (25mm) diameter x 0.315" (8mm) cap thickness x 0.669" (17mm) overall height with an M5 outside screw shaft cap magnet / pot magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Disc Magnet, Grade N35, Nickel plated. Minimum Order Quantity (MOQ) = 5 for this part.

CAP_D16

$0.80

In stock, 12 units

12.0 lb Hold Force: 0.630" (16mm) diameter x 0.236" (6mm) post diameter x 0.512" (13mm) overall height with an M4 thread inside post. Screw-in Hook included for use as a hook magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Disc Magnet, Grade N35, Nickel plated. Minimum Order Quantity (MOQ) = 15 for this part.

CAP_D25

$1.50

In stock, 35 units

48.2 lb Hold Force: 0.984" (25mm) diameter x 0.394" (10mm) post diameter x 0.669" (17mm) overall height with an M5 thread inside post. Screw-in Hook included for use as a hook magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Disc Magnet, Grade N35, Nickel plated. Minimum Order Quantity (MOQ) = 5 for this part.

CAP_D36

$3.25

Only 2 units left

90.4 lb Hold Force: 1.417" (36mm) diameter x 0.394" (10mm) post diameter x 0.709" (18mm) overall height with an M6 thread inside post. Screw-in Hook included for use as a hook magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Disc Magnet, Grade N35, Nickel plated.

CAP_D200C

$2.60 $3.20

In stock, 114 units

25 lb Hold Force: 1.960" (49.78mm) diameter x 0.472" (12mm) post diameter x 0.866" (22mm) overall height with an M6 thread inside post. Screw-in Hook included for use as a hook magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Ceramic Disc Magnet, Grade C8

CAP_R0016

$0.70

In stock, 1145 units

10.9 lb Hold Force: 0.630" (16mm) OD x 0.134" (3.40mm) ID with a 90° Countersunk Hole x 0.200" (5.08mm) thick cap magnet / pot magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Ring Magnet, Grade N35, Nickel plated. Minimum Order Quantity (MOQ) = 5 for this part.

CAP_R125

$1.95

In stock, 29 units

55.0 lb Hold Force: 1.259" (32mm) OD x 0.216" (5.5mm) ID with a 90° Countersunk Hole x 0.307" (7.8mm) thick cap magnet / pot magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Ring Magnet, Grade N40, Nickel plated. Minimum Order Quantity (MOQ) = 10 for this part.

CAP_R140

$2.50

In stock, 51 units

63.9 lb Hold Force: 1.400" (35.56mm) OD x 0.236" (6mm) ID with a 90° Countersink Hole x 0.300" (7.62mm) thick cap magnet / pot magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Ring Magnet, Grade N40, Nickel plated.

CAP_R0036

$2.50

In stock, 113 units

63.9 lb Hold Force: 1.417" (36mm) OD x 0.217" (5.50mm) ID with a 90° Countersunk Hole x 0.315" (8mm) thick cap magnet / pot magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Ring Magnet, Grade N35, Nickel plated.

CAP_R300C

$4.40 $5.20

In stock, 27 units

45 lb Hold Force: 3" (76.20mm) OD x 0.375" (9.52mm) ID x 0.625" (15.87mm) thick cap magnet / pot magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Ceramic Ring Magnet, Grade C8.

Hook101A

$44.95

In stock, 155 units

Ceiling Hook Kit includes: 10 White Magnetic Ceiling Hooks (part number Hook100), 3 piece installer rod (assembled: 36" long) and 1 F-Hook. Our team designed these hooks years ago using strong Neodymium Disc Magnets with nickel plating. Minimum Order Quantity (MOQ) = 1 set

SuperMagnetMan hook magnet. Made with neodymium disc magnets and neodymium rectangle magnets. Great whiteboard magnets and ceiling magnets. Hook magnets for any magnetic surface www.supermagnetman.com

Hook100

$7.80

Sold out

SET OF 4: Magnet Ceiling Hooks, 0.75" (19.05mm) wide x 1" (25.4mm) lg, and the height is 1.5" (38 mm). Made with strong Neodymium Disc Magnets, Nickel plated. Minimum Order Quantity (MOQ) = 1 set

Hook1000

$12.50

In stock, 42 units

Magnet Ceiling Hook Installer Piece. This magnet hook installer fits on a standard wooden broom or paint pole handle and makes for a sturdy installer rod.

Hook4100

$4.50

In stock, 171 units

SET OF 10: Magnetic Mini Hooks. Green. Height: 0.76" (20mm); dia of plastic bottom: 0.48" (12mm). Holds up to 2.5 lbs from a ceiling mount. Made with strong Neodymium Disc Magnets, Nickel plated. Minimum Order Quantity (MOQ) = 3 sets

Hook4300

$4.50

In stock, 102 units

SET OF 10: Magnetic Mini Hooks, Red. Height: 0.76" (20mm); dia of plastic bottom: 0.48" (12mm). Holds up to 2.5 lbs from a ceiling mount. Made with strong Neodymium Disc Magnets, Nickel plated. Minimum Order Quantity (MOQ) = 3 sets

SuperMagnetMan, Super Magnet Man, Neodymium holding magnet, rare earth magnet, white board magnet, bar magnet, strong magnet, powerful magnet, rectangle magnet, classroom, holding magnet, office, Gee Whiz, fun shape magnet

Gee Whiz Set Green

$8.85

In stock, 11 units

Gee Whiz Green Set of 2, Rare Earth Neodymium Strong Holding magnet includes: Green Plastic Handle: 1.969" (50mm) Long x 0.787" (20mm) Wide x 1.073" (27.25mm) Tall; Rectangle N35 magnet: 1.575" (40mm) Long x 0.472" (12mm) Wide x 0.157" (4mm) Thick, Nickel plated.

Magnet Pins are strong holding magnets with many uses. These holding magnets are made with neodymium magnets and used on whiteboards and any magnetic surface.

PIN6200

$7.75

In stock, 75 units

Set of 10. Metal holding magnets. Height: 0.630" (16mm); Overall Diameter: 0.470" (12mm). Nickel coated. Minimum Order Quantity (MOQ) = 1 set

PIN6300

$14.50

In stock, 66 units

Set of 10 Metal holding magnets. Height: 0.827" (21mm); Overall Diameter: 0.590" (15mm). Nickel coated. Minimum Order Quantity (MOQ) = 1 set

PIN6000

$1.50

In stock, 80 units

Plastic Holding Magnet: 1.25" (31.75mm) dia top x 0.125" (3.175mm) thick. Minimum Order Quantity (MOQ) = 5 pcs

SuperMagnetMan holding magnet. SuperMagnetMan Pin Magnet. Made with neodymium disc magnets and neodymium rectangle magnets. Great whiteboard magnets. www.supermagnetman.com

PIN2115

$4.50

In stock, 13 units

Set of 10 White holding magnets. Height: 0.77" (19.71mm); Overall Diameter: 0.47" (12mm). Minimum Order Quantity (MOQ) = 3 packs

PIN2120

$4.50

In stock, 608 units

Set of 10 Red holding magnets. Height: 0.77" (19.71mm); Overall Diameter: 0.47" (12mm). Minimum Order Quantity (MOQ) = 3 packs

PIN2100

$4.50

In stock, 5 units

Set of 10 Yellow Holding Magnets. Height: 0.77" (19.71mm); Overall Diameter: 0.47" (12mm). Minimum Order Quantity (MOQ) = 3 packs

Page 1 / 2Next

Frequently Asked Questions

What are holding magnets used for?

Holding magnets are used in clamping, mounting, and securing components during prototyping and testing.

What types of holding magnets do you carry in stock?

Our holding magnet collection includes cap magnets, pin magnets, and hook magnets. Each style provides dependable holding power for different applications.

Are holding magnets reusable?

Yes, they are designed for repeated use without loss of strength when handled correctly.

What are cap magnets used for?

Cap magnets, also called pot magnets, are designed to provide strong, focused holding force. They are often used for mounting, fixtures, and general-purpose holding where reliability is important.

What are pin and hook magnets used for?

Pin and hook magnets are best suited for household and everyday holding applications such as hanging, posting, or securing lightweight items to metal surfaces. They are not typically used in engineering or prototyping environments.

Customer support

Monday - Friday 8:30am-5:00pm CST

Call us at 205-621-8841

Send a message

Email us at sales@supermagnetman.com