0.010" (0.25mm) Cube Magnet, Set of 10 N50 - Nickel Plated Minimum Order Quantity (MOQ) = 2 sets  

0.020" (0.50mm) Cube Magnet, N50 - Nickel Plated Set of 10 Minimum Order Quantity (MOQ) = 1 set

0.039" (1mm) Cube Magnet N50 - Nickel Plated Minimum Order Quantity (MOQ) = 25 pcs  

0.118" (3mm) Cube Magnet N50 - Nickel Plated Minimum Order Quantity (MOQ) =  30 pcs

0.157" (4mm) Cube Magnet N50 - Nickel Plated Minimum Order Quantity (MOQ) =  20 pcs  

 0.197" (5mm) Cube Magnet N50 - Gold Plated Minimum Order Quantity (MOQ) = 15 pcs  

0.197" (5mm) Cube Magnet N50 - Nickel Plated Minimum Order Quantity (MOQ) =  10 pcs  

0.125" (3.18mm) Cube Magnet N50 - Nickel Plated Minimum Order Quantity (MOQ) = 15 pcs

0.250" (6.35mm) Cube Magnet N40 - Nickel Plated Minimum Order Quantity (MOQ) = 35 pcs  

0.250" (6.35mm) Cube Magnet N52 - Nickel Plated Minimum Order Quantity (MOQ) = 10 pcs  

0.394" (10mm) Cube Magnet N50 - Nickel Plated Minimum Order Quantity (MOQ) = 3 pcs  

0.433" (11mm) Cube Magnet, N42 - Nickel Plated Minimum Order Quantity (MOQ) = 5 pcs.    

0.500" (12.70mm) Cube Magnet N50 - Nickel Plated Minimum Order Quantity (MOQ) = 3 pcs  

0.750" (19.05mm) Cube Magnet N50 - Nickel Plated Minimum Order Quantity (MOQ) = 1 pc  

1" (25.40mm) Cube Magnet N50 - Nickel Plated Minimum Order Quantity (MOQ) = 1 pc

4.8 lb Hold Force: 0.394" (10mm) diameter x 0.197" (5mm) cap thickness x 0.472" (12mm) overall height with an M3 outside screw shaft cap magnet / pot magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Disc Magnet, Grade N35, Nickel plated. Minimum Order Quantity (MOQ) = 10 for this part.  

12.0 lb Hold Force: 0.630" (16mm) diameter x 0.197" (5mm) cap thickness x 0.512" (13mm) overall height with an M4 outside screw shaft cap magnet / pot magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Disc Magnet, Grade N35, Nickel plated. Minimum Order Quantity (MOQ) = 10 for this part.  

48.2 lb Hold Force: 0.984" (25mm) diameter x 0.315" (8mm) cap thickness x 0.669" (17mm) overall height with an M5 outside screw shaft cap magnet / pot magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Disc Magnet, Grade N35, Nickel plated. Minimum Order Quantity (MOQ) = 5 for this part.

12.0 lb Hold Force: 0.630" (16mm) diameter x 0.236" (6mm) post diameter x 0.512" (13mm) overall height with an M4 thread inside post. Screw-in Hook included for use as a hook magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info.   Magnet: Neodymium Disc Magnet, Grade N35, Nickel plated. Minimum Order Quantity (MOQ) = 15 for this part.  

25 lb Hold Force: 1.960" (49.78mm) diameter x 0.472" (12mm) post diameter x 0.866" (22mm) overall height with an M6 thread inside post. Screw-in Hook included for use as a hook magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Ceramic Disc Magnet, Grade C8

48.2 lb Hold Force: 0.984" (25mm) diameter x 0.394" (10mm) post diameter x 0.669" (17mm) overall height with an M5 thread inside post. Screw-in Hook included for use as a hook magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Disc Magnet, Grade N35, Nickel plated. Minimum Order Quantity (MOQ) = 5 for this part.

90.4 lb Hold Force: 1.417" (36mm) diameter x 0.394" (10mm) post diameter x 0.709" (18mm) overall height with an M6 thread inside post. Screw-in Hook included for use as a hook magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Disc Magnet, Grade N35, Nickel plated.

10.9 lb Hold Force: 0.630" (16mm) OD x 0.134" (3.40mm) ID with a 90° Countersunk Hole x 0.200" (5.08mm) thick cap magnet / pot magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Ring Magnet, Grade N35, Nickel plated. Minimum Order Quantity (MOQ) = 5 for this part.  

63.9 lb Hold Force: 1.417" (36mm) OD x 0.217" (5.50mm) ID with a 90° Countersunk Hole x 0.315" (8mm) thick cap magnet / pot magnet. All dimensions +/- 0.5 mm tolerance. NOTE: All Holding Forces are approximate values. Actual Holding Forces will depend upon several factors....read below for more info. Magnet: Neodymium Ring Magnet, Grade N35, Nickel plated.