0.984" (25mm) OD x 0.472" (12mm) ID x 0.551" (14mm) thick. NORTH pole on the OD / SOUTH pole on the ID. N50 Radial Ring Magnets. Neodymium Magnets Rare Earth Magnets
Minimum Order Quantity (MOQ) = 1 pc
|Inside Diameter||0.472" (12mm)|
|Max Working Temp||60°C|
|Outside Diameter||0.984" (25mm) on Brass Sleeve|
|Plating/Coating||Nickel Coating on Magnets, surrounded by Brass Sleeve|
|Aprox. Pull Force||41.28 LB|
|Direction of Magnetism||North on outside; South on inside|
Phone: (205) 621-8841
Address: SuperMagnetMan, 2000 McCain Pkwy , Pelham, AL 35124
For Questions about your order: email@example.com
For Questions about shipping issues: firstname.lastname@example.org
To contact SALES regarding products and pricing, please complete and submit the form below.
If you encounter a problem with your order, or have questions and wish to return your parts, please contact us at 205-621-8841 or email@example.com to acquire a Return Material Authorization (RMA) number. All returns must be made within 60 days of delivery date. To ensure a return is processed quickly, an RMA number and a copy of the packing slip must be included with the shipment.
All returns should be sent to:
Attn: (RMA number)
2000 McCain Pkwy
Pelham, AL 35124
Shipping Errors or Damaged Product
Shipping cost for returns will be the responsibility of the customer unless the parts are incorrect or damaged upon arrival. For shipping errors or damage, SuperMagnetMan will bear the cost to replace the parts and the return shipment for the incorrect or damaged product. Custom orders cannot be returned unless the parts are incorrect or damaged. For details on returning parts, contact our shipping department at 205-621-8841 or email firstname.lastname@example.org for instructions.
Parts returned at the discretion of the customer will be subject to a 10% restocking fee. This policy applies only to orders received from our online store.
If possible, please ensure that all products are in their original packaging to avoid damage during the return shipment. The customer will be responsible for shielding the magnets properly so that the box or envelope is not magnetic at the surface. If a paper clip sticks to any side of the package more packing material (sheet metal, foam wrapping, peanuts, etc.) or a larger box will be required. If the parts are not properly protected, there is no guarantee the return will make it back to us in its original condition, and a refund will not be issued.
If replacement parts are not needed, refunds will be issued for parts only once they are returned to our facility in the same condition they were shipped. This does not apply if the return is for incorrect or damaged parts.
It is important to us that you are happy with your order. Please contact us with any questions or concerns.
Thank you for your business!
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
excellent product, works as described
It is an exelent product , and works very good !!!!!!
Strong , got what was expected , except one segment inside was much weaker than all the others , returned it.
These would be perfect if they had a Teflon sleeve instead of brass and if every other magnet was replaced with a piece of Teflon in the shape of each magnet. That way, as the north goes pass the reed switch, it would read as north then north again then north again and so on... Work to be done, Also the ID should be 12.7 mm so that it can fit over a 1/2" shaft perfectly. not 12mm, that is all wrong